The short answer
As a ballpark, pipe relining in Penrith starts from $2,800 for a short section repair. A full run from the house to the street usually costs $5,000 to $15,000, or roughly $500 to $1,200 per metre. The final price depends mostly on how many metres of pipe need lining, the pipe's width, and how many junctions it passes. You get the exact figure as a fixed quote after a CCTV camera inspection.
Typical prices
| Job | Indicative price | Based on |
|---|---|---|
| Short section (patch) reline | From $2,800 | One isolated crack or root entry, up to about 1 metre, in a 100 mm pipe with clear access |
| Full-length reline | $500 to $1,200 per metre | A 100 mm sewer or stormwater pipe, after set-up. Wider pipes and harder access sit at the top of the range |
| Typical house-to-street run | $5,000 to $15,000 | Around 5 to 20 metres of 100 mm pipe with one or two junctions |
| Junction reinstatement | About $650 to $800 each | Reopening each branch line that joins the relined pipe |
| Digging up and replacing instead | $15,000 to $50,000+ | Typical Sydney excavation cost, before restoring driveways, paving or gardens |
These are ballpark figures, not a quote. They're based on the job scope shown in each row and on typical prices across Western Sydney. Every pipe is different, so request an official quote: we inspect the pipe with a camera, then give you a fixed price before any work starts. The official quote is the price you pay.
Request an official quote →What affects the price
- Length of damaged pipe
- Relining is priced largely by the metre. A short crack near a junction costs far less than a full run from the house to the street.
- Pipe diameter
- Wider sewer and stormwater pipes need larger liners and more resin than a narrow branch line.
- Junctions and bends
- Every join or bend in the run adds work, because the liner has to be cut in or reopened at each connection.
- Tree roots and blockages
- Roots and built-up debris have to be cleared, usually with high-pressure jetting, before a liner can go in.
- Access
- Relining goes in through an existing opening. Easy access to an inspection point keeps the job shorter.
- Pipe condition
- A pipe that has partly collapsed may need a section dug and replaced before the rest can be relined.
Relining or digging up the pipe?
Digging up a pipe means paying for the excavation, the new pipe, and then putting back whatever was on top: a driveway, pavers, a lawn or a garden bed. Relining repairs the pipe from the inside, through an existing opening, so most of those costs never appear.
In many cases relining is faster, causes less disruption and is more cost effective than full replacement. When installed correctly it can last 50 years or more, and the liner resists corrosion and tree roots. Digging is still the right call when a section has fully collapsed, and we'll tell you if that's what we find.
How we quote relining
- There's no call-out fee.
- We clear the pipe if needed and run a CCTV camera through it, so you can see the cracks, roots or breaks yourself.
- You get a fixed, upfront quote for the relining before any work starts. If a diagnostic fee applied, it comes off your final invoice when you go ahead.
Already have a quote to dig the pipe up? Send it through and we'll tell you honestly whether relining can do the job. Read more about our pipe relining service in Penrith, or about blocked drains if the problem started as a drain that keeps blocking.